How to deal with part of the gap is too large for SPC floor?

After installing the spc lock floor, it is found that there will be gaps in a small part of the floor. Generally, according to the installation instructions and careful inspection during installation, this problem will not occur, because each floor is connected by locks. Floor gaps are generally All are caused by improper installation, how to remedy: 1. If the gap appears in the accessory position on the wall of the room, you can remove the accessory floor and reinstall it, and adjust the floor that is not installed. 2. If the gap of the wooden floor is large, you can fill the gap with glass glue. However, if the gap is not more than 5mm, it is best to use bakelite powder. After stirring the bakelite powder, fill in the cracks. 3. If the gap exceeds 5mm, you can go to the hardware store to buy a special caulking paste for wooden floors, which is very easy to use and basically invisible. 4. In fact, the gap of the wooden floor is large, and it does not affect the daily use, so it can be ignored and not treated. In southerly weather, the wooden floor will expand, and the gap will not be squeezed and deformed if the gap is larger. In the winter heating period, you can wipe with a semi-dry rag to maintain the humidity, so that the gap will become smaller in summer, and then use solid wax to maintain it again, and then there will be no such big gap in winter.